A Product Line of
Diodes Incorporated
ZXLD1356/ ZXLD1356Q
Application Information (cont.)
Reducing Output Ripple
Peak to peak ripple current in the LED(s) can be reduced, if required, by shunting a capacitor, Cled, across the LED(s) as shown below:
D1
V IN
Rs
LED
L1
Cled
V IN
I SENSE
LX
package power dissipation limits. The graph below gives details for power derating. This assumes the device to be mounted on a (25mm) PCB
ZXLD1356
A value of 1μF will reduce the supply ripple current by a factor three (approx.). Proportionally lower ripple can be achieved with higher capacitor
values. Note that the capacitor will not affect operating frequency or efficiency, but it will increase start-up delay, by reducing the rate of rise of
LED voltage.
By adding this capacitor the current waveform through the LED(s) changes from a triangular ramp to a more sinusoidal version without altering
the mean current value.
Operation at Low Supply Voltage
Below the under-voltage lockout threshold (V SD ) the drive to the output transistor is turned off to prevent device operation with excessive on-
resistance of the output transistor. The output transistor is not full enhanced until the supply voltage exceeds approximately 17V. At supply
voltages between V SD and 17V care must be taken to avoid excessive power dissipation due to the on-resistance.
Note that when driving loads of two or more LEDs, the forward drop will normally be sufficient to prevent the device from switching below
approximately 6V. This will minimize the risk of damage to the device.
Thermal Considerations
When operating the device at high ambient temperatures, or when driving maximum load current, care must be taken to avoid exceeding the
2
with 1oz copper standing in still air.
Maximum Power Dissipation
2
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
TSOT23-5
DFN3030-6
-40
-25
-10
5
20
35 50 65
80
95
110
125
140
Ambient Temperature (°C)
ZXLD1356/ ZXLD1356Q
Document number: DS33470 Rev. 4 - 2
24 of 29
www.diodes.com
October 2012
? Diodes Incorporated
相关PDF资料
ZXLD1360ET5TA IC LED DRIVR WHITE BCKLGT TSOT-5
ZXLD1362ET5TA IC LED DRIVR WHITE BCKLGT TSOT-5
ZXLD1366DACTC IC LED DRIVER WHITE BCKLGT 6-DFN
ZXLD1370EST16TC IC LED DRVR HIGH BRIGHT TSSOP-16
ZXLD1371QESTTC IC LED DRIVER
ZXLD1374EST20TC IC LED DVR BUCK BOOST 20TSSOP
ZXLD1937ET5TA IC LED DRIVR WHITE BCKLGT TSOT-5
ZXLD381FHTA IC LED DRIVR WHITE BCKLT SOT23-3
相关代理商/技术参数
ZXLD1356ET5TA 功能描述:LED照明驱动器 550mA, 60V LED Drver, Int Swtch RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
ZXLD1356QET5TA 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:60V 550mA LED DRIVER and AUTOMOTIVE GRADE
ZXLD1360 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:30V 1A LED DRIVER with AEC-Q100
ZXLD1360ET5TA 功能描述:LED照明驱动器 7-30V Input 1Amp w/Internal Switch RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
ZXLD1360ET5TA-CUT TAPE 制造商:DIODES 功能描述:ZXLD1360 Series 1 A 1 MHz SMT LED Driver with Internal Switch - TSOT-23-5
ZXLD1362 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:60V 1A LED DRIVER WITH AEC-Q100
ZXLD1362_12 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:60V 1A LED DREIVER WITH AEC-Q100
ZXLD1362ET5TA 功能描述:LED照明驱动器 1A/60V LED DRIVER RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N